Big Data Support¶

Install a DCM¶

Installation instructions can be found at https://github.com/sbgrid/data-capture-module . Note that a shared filesystem between Dataverse and your DCM is required. You cannot use a DCM with non-filesystem storage options such as Swift.

Once you have installed a DCM, you will need to configure two database settings on the Dataverse side. These settings are documented in the Configuration section of the Installation Guide:

• :DataCaptureModuleUrl should be set to the URL of a DCM you installed.
• :UploadMethods should be set to dcm/rsync+ssh.

This will allow your Dataverse installation to communicate with your DCM, so that Dataverse can download rsync scripts for your users.

Downloading rsync scripts via Dataverse API¶

The rsync script can be downloaded from Dataverse via API using an authorized API token. In the curl example below, substitute $PERSISTENT_ID with a DOI or Handle:

curl -H "X-Dataverse-key: $API_TOKEN" $DV_BASE_URL/api/datasets/:persistentId/dataCaptureModule/rsync?persistentId=$PERSISTENT_ID

How a DCM reports checksum success or failure to Dataverse¶

Once the user uploads files to a DCM, that DCM will perform checksum validation and report to Dataverse the results of that validation. The DCM must be configured to pass the API token of a superuser. The implementation details, which are subject to change, are below.

The JSON that a DCM sends to Dataverse on successful checksum validation looks something like the contents of checksumValidationSuccess.json below:

{
  "status": "validation passed",
  "uploadFolder": "OS7O8Y",
  "totalSize": 72
}

• status - The valid strings to send are validation passed and validation failed.
• uploadFolder - This is the directory on disk where Dataverse should attempt to find the files that a DCM has moved into place. There should always be a files.sha file and a least one data file. files.sha is a manifest of all the data files and their checksums. The uploadFolder directory is inside the directory where data is stored for the dataset and may have the same name as the “identifier” of the persistent id (DOI or Handle). For example, you would send "uploadFolder": "DNXV2H" in the JSON file when the absolute path to this directory is /usr/local/glassfish4/glassfish/domains/domain1/files/10.5072/FK2/DNXV2H/DNXV2H.
• totalSize - Dataverse will use this value to represent the total size in bytes of all the files in the “package” that’s created. If 360 data files and one files.sha manifest file are in the uploadFolder, this value is the sum of the 360 data files.

Here’s the syntax for sending the JSON.

curl -H "X-Dataverse-key: $API_TOKEN" -X POST -H 'Content-type: application/json' --upload-file checksumValidationSuccess.json $DV_BASE_URL/api/datasets/:persistentId/dataCaptureModule/checksumValidation?persistentId=$PERSISTENT_ID

Steps to set up a DCM mock for Development¶

Install Flask.

Download and run the mock. You will be cloning the https://github.com/sbgrid/data-capture-module repo.

• git clone git://github.com/sbgrid/data-capture-module.git
• cd data-capture-module/api
• ./dev_mock.sh

If you see an error about not having Flask installed, install it as explained below.

On Mac, you can install Flask with:

• mkvirtualenv mockdcm
• pip install -r requirements-mock.txt

On Ubuntu/Debian, you can install Flask with:

• sudo apt install python-pip (will install python as well)
• pip install flask

Once you have Flask installed, try running the dev mock script again:

• ./dev_mock.sh

This should spin up the DCM mock on port 5000.

Add Dataverse settings to use mock (same as using DCM, noted above):

• curl http://localhost:8080/api/admin/settings/:DataCaptureModuleUrl -X PUT -d "http://localhost:5000"
• curl http://localhost:8080/api/admin/settings/:UploadMethods -X PUT -d "dcm/rsync+ssh"

At this point you should be able to download a placeholder rsync script. Dataverse is then waiting for new from the DCM about if checksum validation has succeeded or not. First, you have to put files in place, which is usually the job of the DCM. You should substitute “X1METO” for the “identifier” of the dataset you create. You must also use the proper path for where you store files in your dev environment.

• mkdir /usr/local/glassfish4/glassfish/domains/domain1/files/10.5072/FK2/X1METO
• mkdir /usr/local/glassfish4/glassfish/domains/domain1/files/10.5072/FK2/X1METO/X1METO
• cd /usr/local/glassfish4/glassfish/domains/domain1/files/10.5072/FK2/X1METO/X1METO
• echo "hello" > file1.txt
• shasum file1.txt > files.sha

Now the files are in place and you need to send JSON to Dataverse with a success or failure message as described above. Make a copy of doc/sphinx-guides/source/_static/installation/files/root/big-data-support/checksumValidationSuccess.json and put the identifier in place such as “X1METO” under “uploadFolder”). Then use curl as described above to send the JSON.

Troubleshooting¶

The following low level command should only be used when troubleshooting the “import” code a DCM uses but is documented here for completeness.

curl -H "X-Dataverse-key: $API_TOKEN" -X POST "$DV_BASE_URL/api/batch/jobs/import/datasets/files/$DATASET_DB_ID?uploadFolder=$UPLOAD_FOLDER&totalSize=$TOTAL_SIZE"

Configuring the RSAL Mock¶

Info for configuring the RSAL Mock: https://github.com/sbgrid/rsal/tree/master/mocks

Also, to configure Dataverse to use the new workflow you must do the following (see also the section below on workflows):

1. Configure the RSAL URL:

curl -X PUT -d 'http://<myipaddr>:5050' http://localhost:8080/api/admin/settings/:RepositoryStorageAbstractionLayerUrl

2. Update workflow json with correct URL information:

Edit internal-httpSR-workflow.json and replace url and rollbackUrl to be the url of your RSAL mock.

3. Create the workflow:

curl http://localhost:8080/api/admin/workflows -X POST --data-binary @internal-httpSR-workflow.json -H "Content-type: application/json"

4. List available workflows:

curl http://localhost:8080/api/admin/workflows

5. Set the workflow (id) as the default workflow for the appropriate trigger:

curl http://localhost:8080/api/admin/workflows/default/PrePublishDataset -X PUT -d 2

6. Check that the trigger has the appropriate default workflow set:

curl http://localhost:8080/api/admin/workflows/default/PrePublishDataset

7. Add RSAL to whitelist
8. When finished testing, unset the workflow:

curl -X DELETE http://localhost:8080/api/admin/workflows/default/PrePublishDataset

Configuring download via rsync¶

In order to see the rsync URLs, you must run this command:

curl -X PUT -d 'rsal/rsync' http://localhost:8080/api/admin/settings/:DownloadMethods

TODO: Document these in the Installation Guide once they’re final.

To specify replication sites that appear in rsync URLs:

curl http://localhost:8080/api/admin/settings/:ReplicationSites -X PUT -d "dv.sbgrid.org:Harvard Medical School:USA,sbgrid.icm.uu.se:Uppsala University:Sweden,sbgrid.ncpss.org:Institut Pasteur de Montevideo:Uruguay,sbgrid.ncpss.org:Shanghai Institutes for Biological Sciences:China"

In the GUI, this is called “Local Access”. It’s where you can compute on files on your cluster.

curl http://localhost:8080/api/admin/settings/:LocalDataAccessPath -X PUT -d "/programs/datagrid"

Administration¶

A Dataverse instance stores a set of workflows in its database. Workflows can be managed using the api/admin/workflows/ endpoints of the Native API. Sample workflow files are available in scripts/api/data/workflows.

At the moment, defining a workflow for each trigger is done for the entire instance, using the endpoint api/admin/workflows/default/«trigger type».

In order to prevent unauthorized resuming of workflows, Dataverse maintains a “white list” of IP addresses from which resume requests are honored. This list is maintained using the /api/admin/workflows/ip-whitelist endpoint of the Native API. By default, Dataverse honors resume requests from localhost only (127.0.0.1;::1), so set-ups that use a single server work with no additional configuration.

Available Steps¶

Dataverse has an internal step provider, whose id is :internal. It offers the following steps:

{
   "provider":":internal",
   "stepType":"log",
   "parameters": {
       "aMessage": "message content",
       "anotherMessage": "message content, too"
   }
}

{
    "provider":":internal",
    "stepType":"pause"
}

{
  "provider":":internal",
  "stepType":"http/sr",
  "parameters": {
      "url":"http://localhost:5050/dump/${invocationId}",
      "method":"POST",
      "contentType":"text/plain",
      "body":"START RELEASE ${dataset.id} as ${dataset.displayName}",
      "expectedResponse":"OK.*",
      "rollbackUrl":"http://localhost:5050/dump/${invocationId}",
      "rollbackMethod":"DELETE ${dataset.id}"
  }
}