These instructions are purposefully opinionated and terse to help you get your development environment up and running as quickly as possible! Please note that familiarity with running commands from the terminal is assumed.
Contents:
The quickest way to get Dataverse running is to use Vagrant as described in the Tools section, but for day to day development work, we recommended the following setup.
Mac OS X or Linux is required because the setup scripts assume the presence of standard Unix utilities.
Windows is not well supported, unfortunately, but Vagrant and Minishift environments are described in the Windows Development section.
Dataverse requires Java 8.
On Mac, we recommend Oracle’s version of the JDK, which can be downloaded from http://www.oracle.com/technetwork/java/javase/downloads/index.html
On Linux, you are welcome to use the OpenJDK available from package managers.
NetBeans IDE (Java EE bundle) is recommended, and can be downloaded from http://netbeans.org . Developers may use any editor or IDE. We recommend NetBeans because it is free, works cross platform, has good support for Java EE projects, and includes a required build tool, Maven.
Below we describe how to build the Dataverse war file with Netbeans but if you prefer to use only Maven, you can find installation instructions in the Tools section.
On Mac, install Homebrew to simplify the steps below: https://brew.sh
Fork https://github.com/IQSS/dataverse and then clone your fork like this:
git clone git@github.com:[YOUR GITHUB USERNAME]/dataverse.git
To build the Dataverse war file using versions of Netbeans newer than 8.2 requires some setup because Java EE support is not enabled by default. An alternative is to build the war file with Maven, which is explained below.
Launch Netbeans and click “File” and then “Open Project”. Navigate to where you put the Dataverse code and double-click “dataverse” to open the project.
If you are using Netbeans 8.2, Java EE support should “just work” but if you are using a newer version of Netbeans, you will see “dataverse (broken)”. If you see “broken”, click “Tools”, “Plugins”, and “Installed”. Check the box next to “Java Web and EE” and click “Activate”. Let Netbeans install all the dependencies. You will observe that the green “Active” checkmark does not appear next to “Java Web and EE”. Restart Netbeans.
In Netbeans, select “dataverse” under Projects and click “Run” in the menu and then “Build Project (dataverse)”. The first time you build the war file, it will take a few minutes while dependencies are downloaded from Maven Central. Feel free to move on to other steps but check back for “BUILD SUCCESS” at the end.
If you installed Maven instead of Netbeans, run mvn package.
NOTE: Do you use a locale different than en_US.UTF-8 on your development machine? Are you in a different timezone
than Harvard (Eastern Time)? You might experience issues while running tests that were written with these settings
in mind. The Maven pom.xml tries to handle this for you by setting the locale to en_US.UTF-8 and timezone
UTC, but more, not yet discovered building or testing problems might lurk in the shadows.
On Mac, run this command:
brew install jq
On Linux, install jq from your package manager or download a binary from http://stedolan.github.io/jq/
Glassfish 4.1 is required.
To install Glassfish, run the following commands:
cd /usr/local
sudo curl -O http://download.oracle.com/glassfish/4.1/release/glassfish-4.1.zip
sudo unzip glassfish-4.1.zip
sudo chown -R $USER /usr/local/glassfish4
cd /usr/local/glassfish4/glassfish/bin
./asadmin start-domain
grep "startup time" /usr/local/glassfish4/glassfish/domains/domain1/logs/server.log
If you are seeing startup times in the 30 second range (31,584ms for “Felix” for example) please be aware that startup time can be greatly reduced (to less than 1.5 seconds in our testing) if you make a small edit to your /etc/hosts file as described at https://stackoverflow.com/questions/39636792/jvm-takes-a-long-time-to-resolve-ip-address-for-localhost/39698914#39698914 and https://thoeni.io/post/macos-sierra-java/
Look for a line that says 127.0.0.1 localhost and add a space followed by the output of hostname which should be something like foobar.local depending on the name of your Mac. For example, the line would say 127.0.0.1 localhost foobar.local if your Mac’s name is “foobar”.
PostgreSQL 9.6 is recommended to match the version in the Installation Guide.
On Mac, go to https://www.postgresql.org/download/macosx/ and choose “Interactive installer by EnterpriseDB” option. We’ve tested version 9.6.9. When prompted to set a password for the “database superuser (postgres)” just enter “password”.
After installation is complete, make a backup of the pg_hba.conf file like this:
sudo cp /Library/PostgreSQL/9.6/data/pg_hba.conf /Library/PostgreSQL/9.6/data/pg_hba.conf.orig
Then edit pg_hba.conf with an editor such as vi:
sudo vi /Library/PostgreSQL/9.6/data/pg_hba.conf
In the “METHOD” column, change all instances of “md5” to “trust”.
In the Finder, click “Applications” then “PostgreSQL 9.6” and launch the “Reload Configuration” app. Click “OK” after you see “server signaled”.
Next, launch the “pgAdmin” application from the same folder. Under “Browser”, expand “Servers” and double click “PostgreSQL 9.6”. When you are prompted for a password, leave it blank and click “OK”. If you have successfully edited “pg_hba.conf”, you can get in without a password.
On Linux, you should just install PostgreSQL from your package manager without worrying about the version as long as it’s 9.x. Find pg_hba.conf and set the authentication method to “trust” and restart PostgreSQL.
Solr 7.3.1 is required.
To install Solr, execute the following commands:
sudo mkdir /usr/local/solr
sudo chown $USER /usr/local/solr
cd /usr/local/solr
curl -O http://archive.apache.org/dist/lucene/solr/7.3.1/solr-7.3.1.tgz
tar xvfz solr-7.3.1.tgz
cd solr-7.3.1/server/solr
cp -r configsets/_default collection1
curl -O https://raw.githubusercontent.com/IQSS/dataverse/develop/conf/solr/7.3.1/schema.xml
mv schema.xml collection1/conf
curl -O https://raw.githubusercontent.com/IQSS/dataverse/develop/conf/solr/7.3.1/solrconfig.xml
mv solrconfig.xml collection1/conf/solrconfig.xml
cd /usr/local/solr/solr-7.3.1
bin/solr start
bin/solr create_core -c collection1 -d server/solr/collection1/conf
Navigate to the directory where you cloned the Dataverse git repo and run these commands:
cd scripts/installer
./install
It’s fine to accept the default values.
After a while you will see Enter admin user name [Enter to accept default]> and you can just hit Enter.
After the script has finished, you should be able to log into Dataverse with the following credentials:
Run the following command:
curl http://localhost:8080/api/admin/settings/:DoiProvider -X PUT -d FAKE
This will disable DOI registration by using a fake (in-code) DOI provider. Please note that this feature is only available in version >= 4.10 and that at present, the UI will give no indication that the DOIs thus minted are fake.
If you can log in to Dataverse, great! If not, please see the Troubleshooting section. For further assitance, please see “Getting Help” in the Introduction section.
You’re almost ready to start hacking on code. Now that the installer script has you up and running, you need to continue on to the Tips section to get set up to deploy code from your IDE or the command line.
Previous: Introduction | Next: Tips