R, rApache and TwoRavens¶

a. httpd (Apache):¶

yum install httpd

Disable SELinux on httpd:

setenforce permissive

getenforce

https strongly recommended; signed certificate (as opposed to self-signed) is recommended.

Directory listing needs to be disabled on the web documents folder served by Apache:

In the main Apache configuration file (/etc/httpd/conf/httpd.conf in the default setup), find the section that configures your web directory. For example, if the DocumentRoot, defined elsewhere in the file, is set to the default "/var/www/html", the opening line of the section will look like this:

<Directory "/var/www/html">

Find the Options line in that section, and make sure that it doesn’t contain the Indexes statement. For example, if the options line in your configuration is

Options Indexes FollowSymLinks

change it to

Options FollowSymLinks

b. R:¶

yum install R R-devel

(EPEL distribution recommended; version 3.* required; 3.1.* recommended as of writing this)

c. rApache:¶

rpm distribution from the HMDC systems group is recommended (latest available version is 1.2.6, as of writing this). The rpm requires Apache libapreq2, that should be available via yum.

install rApache as follows:

yum install libapreq2
rpm -ivh http://mirror.hmdc.harvard.edu/HMDC-Public/RedHat-6/rapache-1.2.6-rpm0.x86_64.rpm

d. Install libcurl-devel:¶

(provides /usr/bin/curl-config, needed by some 3rd-party R packages; package installation will fail silently if it’s not found!):

yum install libcurl-devel

Make sure you have the standard GNU compilers installed (needed for 3rd-party R packages to build themselves).

Update: As of Aug. 4 2015, it appears the following rpms had to be installed:

yum install openssl-devel yum install xml2-devel

Again, without these rpms, R package devtools was failing to install, silently or with a non-informative error message. Note: this package devtools has proven to be very flaky; it is being very actively maintained, new dependencies are being constantly added and new bugs introduced... however, it is only needed to install the package Zelig, the main R workhorse behind TwoRavens. It cannot be installed from CRAN, like all the other 3rd party packages we use - becase TwoRavens requires version 5, which is still in beta. So devtools is needed to build it from sources downloaded directly from github. Once Zelig 5 is released, we’ll be able to drop the requirement for devtools - and that will make this process much simpler. For now, be prepared for it to be somewhat of an adventure.

a. download the app¶

from https://github.com/IQSS/TwoRavens/archive/master.zip

b. unzip¶

and rename the resulting directory dataexplore. Place it in the web root directory of your apache server. We’ll assume /var/www/html/dataexplore in the examples below.

c. run the installer¶

a scripted, interactive installer is provided at the top level of the TwoRavens distribution. Run it as:

cd /var/www/html/dataexplore
chmod +x install.pl
./install.pl

The installer will ask you to provide the following:

Once everything is installed and configured, the installer script will print out a confirmation message with the URL of the TwoRavens application. For example:

The application URL is https://server.dataverse.edu/dataexplore/gui.html

This URL must be configured in the settings of your Dataverse application! This can be done by issuing the following settings API call:

curl -X PUT -d {TWORAVENS_URL} http://localhost:8080/api/admin/settings/:TwoRavensUrl

where “{TWORAVENS_URL}” is the URL reported by the installer script (as in the example above).

d. Ports configuration¶

By default, Glassfish will install itself on ports 8080 and 8181 (for http and https, respectively), and Apache - on port 80 (the default port for http). Under this configuration, your Dataverse will be accessible at http://{your host}:8080 and https://{your host}:8181; and rApache - at http://{your host}/. The TwoRavens installer, above, will default to these values (and assume you are running both the Dataverse and TwoRavens/rApache on the same host).

This configuration may be the easiest to set up if you are simply trying out/testing the Dataverse and TwoRavens. Accept all the defaults, and you should have a working installation in no time. However, if you are planning to use this installation to actually serve data to real users, you’ll probably want to run Glassfish on ports 80 and 443. This way, there will be no non-standard ports in the Dataverse url visible to the users. Then you’ll need to configure the Apache to run on some other port - for example, 8080, instead of 80. This port will only appear in the URL for the TwoRavens app. If you want to use this configuration - or any other that is not the default one described above! - it is your job to reconfigure Glassfish and Apache to run on the desired ports before you run the TwoRavens installer.

Furthermore, while the default setup assumes http as the default protocol for both the Dataverse and TwoRavens, https is strongly recommended for a real production system. Again, this will be your responsibility, to configure https in both Glassfish and Apache. Glassfih comes pre-configured to run https on port 8181, with a self-signed certificiate. For a production system, you will most certainly will want to obtain a properly signed certificate and configure Glassfish to use it. Apache does not use https out of the box at all. Again, it is the responsibility of the installing user, to configure Apache to run https, and, providing you are planning to run rApache on the same host as the Dataverse, use the same SSL certificate as your Glassfish instance. Again, it will need to be done before you run the installer script above. All of this may involve some non-trivial steps and will most likely require help from your local network administrator - unless you happen to be your local sysadmin. Unfortunately, we cannot provide step-by-step instructions for these tasks. As the actual steps required will likely depend on the specifics of how your institution obtains signed SSL certificates, the format in which you receive these certificates, etc. Good luck!

Finally: If you choose to have your Dataverse support secure Shibboleth authentication, it will require a server and port configuration that is different still. Under this arrangement Glassfish instance is running on a high local port unaccessible from the outside, and is “hidden” behind Apache. With the latter running on the default https port, accepting and proxying the incoming connections to the former. This is described in the Shibboleth section of the Installation Guide (please note that, at the moment, this functionality is offered as “experimental”). With this proxying setup in place, the TwoRavens and rApache configuration actually becomes simpler. As both the Dataverse and TwoRavens will be served on the same port - 443 (the default port for https). So when running the installer script above, and providing you are planning to run both on the same server, enter “https”, your host name and “443” for the rApache protocol, host and port, respectively. The base URL of the Dataverse app will be simply https://{your host name}/.

I. Configure the TwoRavens web (Javascript) application.¶

Edit the file /var/www/html/dataexplore/app_ddi.js.

find and edit the following 3 lines:

1. var production=false;

   and change it to true;

2. hostname="localhost:8080";

   so that it points to the dataverse app, from which TwoRavens will be obtaining the metadata and data files. (don’t forget to change 8080 to the correct port number!)

   and

3. var rappURL = "http://0.0.0.0:8000/custom/";

   set this to the URL of your rApache server, i.e.

   "https://<rapacheserver>:<rapacheport>/custom/";

II. Configure the R applications to run under rApache¶

rApache is a loadable httpd module that provides a link between Apache and R. When you installed the rApache rpm, under 0., it placed the module in the Apache library directory and added a configuration entry to the config file (/etc/httpd/conf/httpd.conf).

Now we need to configure rApache to serve several R “mini-apps”, from the R sources provided with TwoRavens.

RSourceOnStartup "/var/www/html/dataexplore/rook/rooksource.R"
<Location /custom/zeligapp>
   SetHandler r-handler
   RFileEval /var/www/html/dataexplore/rook/rookzelig.R:Rook::Server$call(zelig.app)
</Location>
<Location /custom/subsetapp>
   SetHandler r-handler
   RFileEval /var/www/html/dataexplore/rook/rooksubset.R:Rook::Server$call(subset.app)
</Location>
<Location /custom/transformapp>
   SetHandler r-handler
   RFileEval /var/www/html/dataexplore/rook/rooktransform.R:Rook::Server$call(transform.app)
</Location>
<Location /custom/dataapp>
   SetHandler r-handler
   RFileEval /var/www/html/dataexplore/rook/rookdata.R:Rook::Server$call(data.app)
</Location>

mkdir --parents /var/www/html/custom/pic_dir

mkdir --parents /var/www/html/custom/preprocess_dir

mkdir --parents /var/www/html/custom/log_dir

chown -R apache.apache /var/www/html/custom