TwoRavens¶

a. httpd (Apache):¶

It’s probably installed already, but if not:

yum install httpd

This rApache configuration does not work with SELinux. Execute the following commands to disable SELinux:

setenforce permissive

getenforce

(Note: If you can get rApache to work with SELinux, we encourage you to make a pull request! Please see the SELinux section of the Developer Guide to get started.)

If you choose to serve TwoRavens and run rApache under https, a “real” signed certificate (as opposed to self-signed) is recommended.

For security reasons, directory listing needs to be disabled on the web documents folder served by Apache:

In the main Apache configuration file (/etc/httpd/conf/httpd.conf in the default setup), find the section that configures your web directory. For example, if the DocumentRoot, defined elsewhere in the file, is set to the default "/var/www/html", the opening line of the section will look like this:

<Directory "/var/www/html">

Find the Options line in that section, and make sure that it doesn’t contain the Indexes statement. For example, if the options line in your configuration is

Options Indexes FollowSymLinks

change it to

Options FollowSymLinks

b. R:¶

Can be installed with yum:

yum install R R-devel

EPEL distribution recommended; version 3.3.2 is strongly recommended.

If yum isn’t configured to use EPEL repositories ( https://fedoraproject.org/wiki/EPEL ):

CentOS users can install the RPM epel-release. For RHEL/CentOS 6:

yum install https://dl.fedoraproject.org/pub/epel/epel-release-latest-6.noarch.rpm

RHEL users will want to log in to their organization’s respective RHN interface, find the particular machine in question and:

• click on “Subscribed Channels: Alter Channel Subscriptions”
• enable EPEL, Server Extras, Server Optional

If you are upgrading an existing installation of TwoRavens, or if you have attempted to install it in the past and it didn’t work, we strongly recommend reinstalling R completely, erasing all the extra R packages that may have been already built.

Uninstall R:

yum erase R R-devel

Wipe clean any R packages that were left behind:

rm -rf /usr/lib64/R/library/*
rm -rf /usr/share/R/library/*

... then install R with yum.

c. rApache:¶

For RHEL/CentOS 6, we recommend that you download rapache-1.2.6-rpm0.x86_64.rpm and install it with:

yum install rapache-1.2.6-rpm0.x86_64.rpm

If you are using RHEL/CentOS 7, you can download our experimental rapache-1.2.7-rpm0.x86_64.rpm and install it with:

yum install apache-1.2.7-rpm0.x86_64.rpm

d. Install the build environment for R:¶

Once again, extra R packages will need to be built from sources. Make sure you have the standard GNU compilers installed: gcc, gcc-c++ and gcc-gfortran.

One of the required packages needed /bin/ed. The R package build script needs /usr/bin/wget. If these are missing, the rpms can be installed with:

yum install ed wget

Depending on how your system was originally set up, you may end up needing to install some other missing rpms. We’ll explain how to troubleshoot compiler errors caused by missing libraries and/or executables.

a. download and unzip the application¶

(though you may have already done so, in step 2. above - see the instructions there).

b. Rename the resulting directory dataexplore...¶

...and place it in the web root directory of your apache server. We’ll assume /var/www/html/dataexplore in the examples below:

mv TwoRavens-a6869eb28693d6df529e7cb3888c40de5f302b66 /var/www/html/dataexplore

c. run the installer¶

A scripted, interactive installer is provided at the top level of the TwoRavens distribution.

The installer will ask you to provide the following:

Please note the default values above. The installer assumes

• that you are running both the Dataverse and TwoRavens/rApache on the same host;
• the default ports for Apache (80) and Glassfish that is serving your Dataverse (8080);
• http (not https!) for both .

This configuration is recommended if you are simply trying out/testing Dataverse and TwoRavens. Accept all the defaults, and you should have a working installation in no time.

However, if you are planning to use this installation to actually serve data to users, you’ll most likely want to run under HTTPS. Please refer to the discussion in the Appendix, I. for more information on setting it up. Configuring HTTPS takes a little extra work. But note that the TwoRavens configuration can actually end up being simpler. If you use our recommended configuration for HTTPS (described in the Appendix), both the “TwoRavens URL” and “Dataverse URL” will be the same: https://{your hostname}.

Run the installer as:

cd /var/www/html/dataexplore
chmod +x install.pl
./install.pl

Once everything is installed and configured, the installer script will print out a confirmation message with the URL of the TwoRavens application. For example:

The application URL is https://server.dataverse.edu/dataexplore/gui.html

d. Version conflict check (preprocess.R)¶

One of the R files in the TwoRavens distribution, rook/preprocess/preprocess.R is used by both TwoRavens and Dataverse. Dataverse application maintains its own copy of the file, <DOMAIN DIRECTORY>/applications/dataverse-<VERSION>/WEB-INF/classes/edu/harvard/iq/dataverse/rserve/scripts/preprocess.R. (Why not share the file from the same location? Because the two applications can potentially be installed on 2 different servers). Compare the two files. It is important that the two copies are identical.

If different:

• the TwoRavens version wins. Meaning, you need to copy the version supplied with this TwoRavens distribution and overwrite the Glassfish version (above); then restart Glassfish.

• unless this is a brand new Dataverse installation, it may have cached summary statistics fragments that were produced with the older version of this R code. You must remove all such cached files:

  cd <DATAVERSE FILES DIRECTORY>
  find . -name '*.prep' | while read file; do /bin/rm $f; done

(Yes, this is a HACK! We are working on finding a better way to ensure this compatibility between TwoRavens and Dataverse!)

e. Enable TwoRavens’ Explore Button in Dataverse¶

Now that you have installed TwoRavens, the following must be done in order to integrate it with your Dataverse.

First, enable the Data Explore option:

curl -X PUT -d true http://localhost:8080/api/admin/settings/:TwoRavensTabularView

Once enabled, the ‘Explore’ button will appear next to ingested tabular data files; clicking it will redirect the user to the instance of TwoRavens, initialized with the data variables from the selected file.

Then, the TwoRavens URL must be configured in the settings of your Dataverse application - so that it knows where to redirect the user. This can be done by issuing the following API call:

curl -X PUT -d {TWORAVENS_URL} http://localhost:8080/api/admin/settings/:TwoRavensUrl

where {TWORAVENS_URL} is the URL reported by the installer script (as in the example at the end of step c., above).

f. Perform a quick test of TwoRavens functionality¶

Ingest the dummy data file 50by1000.dta (supplied in the Dataverse source tree in dataverse/scripts/search/data/tabular). If successfully ingested as tabular data, the file should appear on the Dataset page as follows:

If the file does NOT appear as Tabular Data - if it is shown as Stata/dta, and no tabular attributes - the numbers of Variables and Observations and the UNF - are being displayed, try to refresh the page a couple of times. If that doesn’t change the view to Tabular, it likely means that something went very wrong with the tabular ingest. Consult the Glassfish server log for any error messages that may explain the failure.

If the file is showing as Tabular Data, but the Explore button isn’t present, double-check that the steps in e., above, were correctly performed.

Otherwise, click on the Explore button. This will open TwoRavens in a new browser window. If the application initializes successfully, you should see the “data pebbles” representing the first 3 variables in the file:

If instead TwoRavens opens with an empty view - no variables listed on the left, and/or no “data pebbles” in the middle panel, we’ll provide some diagnostics tips further below.

Otherwise, mouse over var1, and click on Dep Var, selecting the variable as “dependent”:

Then select ls from the list of models on the right:

Then click the Estimate button, above. If the model is successfully executed, the results will appear in a new popup panel, with some generated graph images, as shown below:

Troubleshooting:

If TwoRavens fails to initialize properly:

Symptom: instead of the “data pebbles” display shown in the second image, above, you are getting an empty view:

A very likely cause of this condition is TwoRavens not being able to obtain the metadata describing the variables from your Dataverse. Specifically, the “preprocessed summary statistics”.

To diagnose: note the value of the dfId URL parameter in the view above. Try to request the preprocessed fragment by going to the API end point directly:

<YOUR DATAVERSE URL>/api/access/datafile/<FILE ID>?format=prep

Where the <FILE ID> is the value of the dfId parameter from the previous view. You should get the output that looks like this:

{"dataset":{"private":false},"variables":{"var1":{"plottype":"bar","plotvalues":{"1":100,"2":100,"3":100,"4":100,"5":100,"6":100,"7":100,"8":100,"9":100,"10":100},"varnamesSumStat":"var1","median":5.5,"mean":5.5,"mode":"1","max":10,"min":1,"invalid":0,"valid":1000,"sd":2.87371854193452,"uniques":10,"herfindahl":0.1,"freqmode":100,"fewest":"1","mid":"1","freqfewest":"100","freqmid":"100","numchar":"numeric","nature":"ordinal","binary":"no","interval":"discrete","varnamesTypes":"var1","defaultInterval":"discrete","defaultNumchar":"numeric","defaultNature":"ordinal","defaultBinary":"no"},"var3":{"plottype":"bar","plotvalues":
...

If you are getting an error message instead, this is likely an Rserve connection problem. Consult the Glassfish server log for any Rserve-related “connection refused” messages. See if Rserve is running, and start it with service rserve start, if necessary. Check if the Rserve host name, username and password in the Glassfish configuration match the actual Rserve configuration. (this is discussed in the section 2. of the guide). Correct this, if necessary, then try again.

If you ARE getting JSON output, but the TwoRavens view is still broken:

• Look closely at the very beginning of the JSON fragment. Does it have the {"prvate":false} entry, as shown in the example above? If not, this likely an R code version mismatch, described in section 3.d., above. Correct the problem as described there, then try again.
• If the JSON looks exactly as the fragment above, yet still no data pebbles - enable the JavaScript error console in the TwoRavens window, and try again. Look for any error messages; and, specifically, for any URLs that TwoRavens is failing to access. Look for the debugging entry that shows TwoRavens attempting to download the format=prep fragment. Does the URL have the correct host name, port and/or the protocol (http vs. https)? If not, re-run the installer, specifying the correct Dataverse URL, and try again.

Symptom: the variables view is initialized properly, but no model output appears when you click Estimate, with or without error messages.

• Make sure you properly selected the dependent variable (var1) and the model (ls).
• Consult the Apache error log files (error_log and/or ssl_error_log, in /var/log/httpd) for any error messages. Possible error condition may include: missing R packages (double-check that the R setup, in step 2. completed without errors); selinux (“Secure Linux”) errors related to the rApache shared libraries, or directory permissions (disable Selinux, as described in 1.a.)

I. Ports configuration discussion¶

By default, Glassfish will install itself on ports 8080 and 8181 (for HTTP and HTTPS, respectively). Apache will install itself on port 80 (the default port for HTTP). Under this configuration, your Dataverse will be accessible at http://{your host}:8080, and rApache at http://{your host}/. The TwoRavens installer, above, will default to these values (and assume you are running both the Dataverse and TwoRavens/rApache on the same host).

This configuration is the easiest to set up if you are simply trying out/testing the Dataverse and TwoRavens integration. Accept all the defaults, and you should have a working installation in no time. However, if you are planning to use this installation to actually serve data to real users, you will most likely want to run your Dataverse on a standard port; and to use HTTPS. It is definitely possible to configure Glassfish to serve the application under HTTPS on port 443. However, we do not recommend this setup! For at least 2 reasons: 1. Running Glassfish on port 443 will require you to run it as root user; which should be avoided, if possible, for reasons of security. Also, 2) installing SSL certificates under Glassfish is unnecessarily complicated. The alternative configuration that we recommend is to “hide” your Glassfish behind Apache. In this setup Apache serves as the HTTPS front running on port 443, proxying the traffic to Glassfish using mod_proxy_ajp; and Glassfish is running as an non-privileged user on a high port that’s not accessible from the outside. Unlike Glassfish, Apache has a mechanism for running on a privileged port (in this case, 443) as a non-privileged user. It is possible to use this configuration, and have this Apache instance serve TwoRavens and rApache too, all on the same server. Please see “Network Ports” under the Configuration section, and the Shibboleth section of the Installation Guide for more information and configuration instructions.

II. What the r-setup.sh script does:¶

The script uses the list of 45 R library packages and specified package versions, supplied in TwoRavens/r-setup/package-versions.txt to replicate the library environment that has been proven to work on the Dataverse servers.

If any packages fail to build, the script will alert the user.

For every package, the (potentially verbose) output of the build process is saved in its own file, RINSTALL.{PACKAGE NAME}.LOG. So if, for example, the package Zelig fails to install, the log file RINSTALL.Zelig.LOG should be consulted for any error messages that may explain the reason for the failure; such as a missing library, or a missing compiler, etc. Be aware that diagnosing compiler errors will require at least some programming and/or system administration skills.

III. What the install.pl script does:¶

The steps below are performed by the install.pl script. Provided for reference only! The instruction below could be used to configure it all by hand, if necessary, or to verify that the installer has done it correctly. Once again: normally you would NOT need to individually perform the steps below!

TwoRavens is distributed with a few hard-coded host and directory names. So these need to be replaced with the values specific to your system.

In the file /var/www/html/dataexplore/app_ddi.js the following 3 lines need to be edited:

1. var production=false;

   changed to true;

2. hostname="localhost:8080";

   changed to point to the dataverse app, from which TwoRavens will be obtaining the metadata and data files. (don’t forget to change 8080 to the correct port number!)

3. var rappURL = "http://0.0.0.0:8000/custom/";

   changed to the URL of your rApache server, i.e.

   "http(s)://<rapacheserver>:<rapacheport>/custom/";

In dataexplore/rook the following files need to be edited:

rookdata.R, rookzelig.R, rooksubset.R, rooktransform.R, rookselector.R, rooksource.R

replacing every instance of production<-FALSE line with production<-TRUE.

(yeah, that’s why we provide that installer script...)

In dataexplore/rook/rooksource.R the following line:

setwd("/usr/local/glassfish4/glassfish/domains/domain1/docroot/dataexplore/rook")

needs to be changed to:

setwd("/var/www/html/dataexplore/rook")

(or your dataexplore directory, if different from the above)

In dataexplore/rook/rookutils.R the following lines need to be edited:

url <- paste("https://beta.dataverse.org/custom/preprocess_dir/preprocessSubset_",sessionid,".txt",sep="")

and

imageVector[[qicount]]<<-paste("https://beta.dataverse.org/custom/pic_dir/", mysessionid,"_",mymodelcount,qicount,".png", sep = "")

changing the URL to reflect the correct location of your rApache instance. make sure that the protocol (http vs. https) and the port number are correct too, not just the host name!

Next, in order to configure rApache to serve several TwoRavens “mini-apps”,

the installer creates the file tworavens-rapache.conf in the Apache’s /etc/httpd/conf.d directory with the following configuration:

RSourceOnStartup "/var/www/html/dataexplore/rook/rooksource.R"
<Location /custom/zeligapp>
   SetHandler r-handler
   RFileEval /var/www/html/dataexplore/rook/rookzelig.R:Rook::Server$call(zelig.app)
</Location>
<Location /custom/subsetapp>
   SetHandler r-handler
   RFileEval /var/www/html/dataexplore/rook/rooksubset.R:Rook::Server$call(subset.app)
</Location>
<Location /custom/transformapp>
   SetHandler r-handler
   RFileEval /var/www/html/dataexplore/rook/rooktransform.R:Rook::Server$call(transform.app)
</Location>
<Location /custom/dataapp>
   SetHandler r-handler
   RFileEval /var/www/html/dataexplore/rook/rookdata.R:Rook::Server$call(data.app)
</Location>

The following directories are created by the installer to store various output files produced by TwoRavens:

mkdir --parents /var/www/html/custom/pic_dir

mkdir --parents /var/www/html/custom/preprocess_dir

mkdir --parents /var/www/html/custom/log_dir

The ownership of the TwoRavens directories is changed to user apache:

chown -R apache.apache /var/www/html/custom

chown -R apache /var/www/html/dataexplore

Finally, the installer restarts Apache, for all the changes to take effect:

service httpd restart