Docker, Kubernetes, and OpenShift

Dataverse is exploring the use of Docker, Kubernetes, OpenShift and other container-related technologies.


From the Dataverse perspective, we are in the business of providing a “template” for OpenShift that describes how the various components we build our application on (Glassfish, PostgreSQL, Solr, the Dataverse war file itself, etc.) work together. We publish Docker images to DockerHub at that are used in this OpenShift template.

Dataverse’s (light) use of Docker is documented below in a separate section. We actually started with Docker in the context of OpenShift, which is why OpenShift is listed first but we can imagine rearranging this in the future.

The OpenShift template for Dataverse can be found at conf/openshift/openshift.json and if you need to hack on the template or related files under conf/docker it is recommended that you iterate on them using Minishift.

The instructions below will walk you through spinning up Dataverse within Minishift. It is recommended that you do this on the “develop” branch to make sure everything is working before changing anything.

Install Minishift

Minishift requires a hypervisor and since we already use VirtualBox for Vagrant, you should install VirtualBox from .

Download the Minishift tarball from and put the minishift binary in /usr/local/bin or somewhere in your $PATH. This assumes Mac or Linux. These instructions were last tested on version v1.14.0+1ec5877 of Minishift.

At this point, you might want to consider going through the Minishift quickstart to get oriented:

Start Minishift

minishift start --vm-driver=virtualbox --memory=4GB

Log in to Minishift from the Command Line

Note that if you just installed and started Minishift, you are probably logged in already. This oc login step is included in case you aren’t logged in anymore.

oc login --username developer --password=whatever

Use “developer” as the username and a couple characters as the password.

Create a Minishift Project

Calling the project “project1” is fairly arbitrary. We’ll probably want to revisit this name in the future. A project is necessary in order to create an OpenShift app.

oc new-project project1

Note that oc projects will return a list of projects.

Create a Dataverse App within the Minishift Project

The following command operates on the conf/openshift/openshift.json file that resides in the main Dataverse git repo. It will download images from Docker Hub and use them to spin up Dataverse within Minishift/OpenShift. Later we will cover how to make changes to the images on Docker Hub.

oc new-app conf/openshift/openshift.json

Log into Minishift and Visit Dataverse in your Browser

After running the oc new-app command above, deployment of Dataverse within Minishift/OpenShift will begin. You should log into the OpenShift web interface to check on the status of the deployment. If you just created the Minishift VM with the minishift start command above, the oc new-app step is expected to take a while because the images need to be downloaded from Docker Hub. Also, the installation of Dataverse takes a while.

Typing minishift console should open the OpenShift web interface in your browser. The IP address might not be “” but it’s used below as an example.

In the OpenShift web interface you should see a link that looks something like but the IP address will vary and will match the output of minishift ip. Eventually, after deployment is complete, the Dataverse web interface will appear at this URL and you will be able to log in with the username “dataverseAdmin” and the password “admin”.

Another way to verify that Dataverse has been succesfully deployed is to make sure that the Dataverse “info” API endpoint returns a version (note that minishift ip is used because the IP address will vary):

curl http://dataverse-project1.`minishift ip`

From the perspective of OpenShift and the openshift.json config file, the HTTP link to Dataverse in called a route. See also documentation for oc expose.


Here are some tips on troubleshooting your deployment of Dataverse to Minishift.

Check Status of Dataverse Deployment to Minishift

oc status

Once images have been downloaded from Docker Hub, the output below will change from Pulling to Pulled.

oc get events | grep Pull

This is a deep dive:

oc get all

Review Logs of Dataverse Deployment to Minishift

Logs are provided in the web interface to each of the deployment configurations. The URLs should be something like this (but the IP address) will vary and you should click “View Log”. The installation of Dataverse is done within the one Glassfish deployment configuration:

You can also see logs from each of the components (Glassfish, PostgreSQL, and Solr) from the command line with oc logs like this (just change the grep at the end):

oc logs $(oc get po -o json | jq '.items[] | select(.kind=="Pod")' -r | grep glassfish)

Get a Shell (ssh/rsh) on Containers Deployed to Minishift

You can get a shell on any of the containers for each of the components (Glassfish, PostgreSQL, and Solr) with oc rc (just change the grep at the end):

oc rsh $(oc get po -o json | jq '.items[] | select(.kind=="Pod")' -r | grep glassfish)

From the rsh prompt of the Glassfish container you could run something like the following to make sure that Dataverse is running on port 8080:

curl http://localhost:8080/api/info/version

Cleaning up

If you simply wanted to try out Dataverse on Minishift and want to clean up, you can run oc delete project project1 to delete the project or minishift stop and minishift delete to delete the entire Minishift VM and all the Docker containers inside it.

Making Changes

Making Changes to Docker Images

If you’re interested in using Minishift for development and want to change the Dataverse code, you will need to get set up to create Docker images based on your changes and push them to a Docker registry such as Docker Hub (or Minishift’s internal registry, if you can get that working, mentioned below). See the section below on Docker for details.

Using Minishift for day to day Dataverse development might be something we want to investigate in the future. These blog posts talk about developing Java applications using Minishift/OpenShift:

Making Changes to the OpenShift Config

If you are interested in changing the OpenShift config file for Dataverse at conf/openshift/openshift.json note that in many cases once you have Dataverse running in Minishift you can use oc process and oc apply like this (but please note that some errors and warnings are expected):

oc process -f conf/openshift/openshift.json | oc apply -f -

The slower way to iterate on the openshift.json file is to delete the project and re-create it.

Running Containers to Run as Root in Minishift

It is not recommended to run containers as root in Minishift because for security reasons OpenShift doesn’t support running containers as root. However, it’s good to know how to allow containers to run as root in case you need to work on a Docker image to make it run as non-root.

For more information on improving Docker images to run as non-root, see “Support Arbitrary User IDs” at

Let’s say you have a container that you suspect works fine when it runs as root. You want to see it working as-is before you start hacking on the Dockerfile and entrypoint file. You can configure Minishift to allow containers to run as root with this command:

oc adm policy add-scc-to-user anyuid -z default --as system:admin

Once you are done testing you can revert Minishift back to not allowing containers to run as root with this command:

oc adm policy remove-scc-from-user anyuid -z default --as system:admin


From the Dataverse perspective, Docker is important for a few reasons:

  • We are thankful that NDS Labs did the initial work to containerize Dataverse and include it in the “workbench” we mention in the Preparation section of the Installation Guide. The workbench allows people to kick the tires on Dataverse.
  • There is interest from the community in running Dataverse on OpenShift and some initial work has been done to get Dataverse running on Minishift in Docker containers. Minishift makes use of Docker images on Docker Hub. To build new Docker images and push them to Docker Hub, you’ll need to install Docker. The main issue to follow is .
  • Docker may aid in testing efforts if we can easily spin up Docker images based on code in pull requests and run the full integration suite against those images. See the Testing section for more information on integration tests.

Installing Docker

On Linux, you can probably get Docker from your package manager.

On Mac, download the .dmg from and install it. As of this writing is it known as Docker Community Edition for Mac.

On Windows, FIXME (“Docker Community Edition for Windows” maybe???).

As explained above, we use Docker images in two different contexts:

  • Testing using an “all in one” Docker image (ephemeral, unpublished)
  • Future production use on Minishift/OpenShift/Kubernetes (published to Docker Hub)

All In One Docker Images for Testing

The “all in one” Docker files are in conf/docker-aio and you should follow the readme in that directory for more information on how to use them.

Future production use on Minishift/OpenShift/Kubernetes

When working with Docker in the context of Minishift, follow the instructions above and make sure you get the Dataverse Docker images running in Minishift before you start messing with them.

As of this writing, the Dataverse Docker images we publish under are highly experimental. They were originally tagged with branch names like kick-the-tires and as of this writing the latest tag should be considered highly experimental and not for production use. See for the latest status and please reach out if you’d like to help!

Change to the docker directory:

cd conf/docker

Edit one of the files:

vim dataverse-glassfish/Dockerfile

At this point you want to build the image and run it. We are assuming you want to run it in your Minishift environment. We will be building your image and pushing it to Docker Hub. Then you will be pulling the image down from Docker Hub to run in your Minishift installation. If this sounds inefficient, you’re right, but we haven’t been able to figure out how to make use of Minishift’s built in registry (see below) so we’re pushing to Docker Hub instead.

Log in to Docker Hub with an account that has access to push to the iqss organization:

docker login

(If you don’t have access to push to the iqss organization, you can push elsewhere and adjust your openshift.json file accordingly.)

Build and push the images to Docker Hub:


Note that you will see output such as digest: sha256:213b6380e6ee92607db5d02c9e88d7591d81f4b6d713224d47003d5807b93d4b that should later be reflected in Minishift to indicate that you are using the latest image you just pushed to Docker Hub.

You can get a list of all repos under the iqss organization with this:


To see a specific repo:


Known Issues with Dataverse Images on Docker Hub

Again, Dataverse Docker images on Docker Hub are highly experimental at this point. As of this writing, their purpose is primarily for kicking the tires on Dataverse. Here are some known issues:

  • The Dataverse installer is run in the entrypoint script every time you run the image. Ideally, Dataverse would be installed in the Dockerfile instead. Dataverse is being installed in the entrypoint script because it needs PosgreSQL to be up already so that database tables can be created when the war file is deployed.
  • The storage should be abstracted. Storage of data files and PostgreSQL data. Probably Solr data.
  • Better tuning of memory by examining /sys/fs/cgroup/memory/memory.limit_in_bytes and incorporating this into the Dataverse installation script.
  • Only a single Glassfish server can be used. See “Dedicated timer server in a Dataverse server cluster” in the Dataverse Application Timers section of the Installation Guide.
  • Only a single PostgreSQL server can be used.
  • Only a single Solr server can be used.

Get Set Up to Push Docker Images to Minishift Registry

FIXME indicates that it should be possible to make use of the builtin registry in Minishift while iterating on Docker images but you may get “unauthorized: authentication required” when trying to push to it as reported at so until we figure this out, you must push to Docker Hub instead. Run docker login and use the conf/docker/ script to push Docker images you create to

If you want to troubleshoot this, take a close look at the docker login command you’re using to make sure the OpenShift token is being sent.

An alternative to using the the Minishift Registry is to do a local build. This isn’t documented but should work within Minishift because it’s an all-in-one OpenShift environment. The steps at a high level are to ssh into the Minishift VM and then do a docker build. For a stateful set, the image pull policy should be never.

Previous: Coding Style | Next: Making Releases